Vacuum Pump Oil Change Service and Pump Repairs
LET US DO THE DIRTY WORK FOR YOU.
One of the often forgotten tasks when using a vacuum pump or vacuum system is to change the
oil on a regular schedule. This is especially true in Research Laboratories where the researchers
are much more involved with their research than in looking after routine maintenance on their
equipment.
We can help you.
We can visit your Laboratory on a 3 or 4 month schedule and change the oil in the vacuum pumps
used in your wet chemistry or other vacuum applications for you.
The vacuum pump oil is changed, the vacuum pump is checked over for correct operation, any
leaked oil is cleaned up and the pump is wiped down. If you do not have oil disposal containers at
your site, we will take the dirty oil away and dispose of it safely. Other maintenance such as oil
mist filter element changes can be carried out at the same time if those accessories are mounted
on the vacuum pump.
Many wet chemistry vacuum pumps are exhausted into a main exhaust duct system, but we
recommend that each vacuum pump also has its own oil mist filter. If oil mist is exhausted into the
common exhaust ducting there could be an accumulation of condensed oil on the inside of the
ducts. This is a fire hazard. Using oil mist exhaust filters greatly reduces the chance of this hazard
occurring.
Contact Vacuum and Low Pressure Consulting for an estimate on this service for your
laboratory. Call Howard at 610-792-3505 (office) or 484-366-2621 (mobile).
This service is provided by: InPlant Services, LLC located in Royerford, PA near Philadelphia.
Due to the cost of travel time, this service is only available in the Greater
Philadelphia area.
Vacuum and Low Pressure Consulting A division of TRING ENTERPRISES LLC 220 Belgian Drive, Spring City, PA 19475
|
TRING ENTERPRISES LLC is a manufacturers representative for:
InPlant Services, LLC
Providing a vacuum pump oil change service for research laboratories and any other companies requiring this
service in the Greater Philadelphia area
HyVac Products Inc.
Manufacturers of the HyVac line of oil sealed Vee Belt Drive vacuum pumps that are well suited for wet
chemistry and many other vacuum applications. The company also supplies direct drive vacuum pumps,
vacuum gauges and a range of vacuum fittings.
HyVac Products Inc. will also repair your faulty Laboratory or small Industrial sized Vacuum Pump. In our local
area we will pick up and deliver which save you time and money preparing a vacuum pump for commercial
shipment.
Contact us for more information.
NEW Vacuum pump repair service available.
Call us if you have a Laboratory sized or small Industrial vacuum pump that needs repair.
Don't worry about packing and shipping hassles, we will pick up and deliver. This saves
you time and eliminates the chance of shipping damage
Call Howard at 610-792-3505 for a pump pick up.